Here is another Carol Duvall video, this one from here holiday series. I like to post these when I find them because I miss Carol very much.
This one is about making a reindeer from socks:
Here's a video for a funky wreath:
Saturday, October 1, 2011
Thursday, September 29, 2011
Beautiful and easy Snowflake Chandelier
For those last minute party decorations this year, why not try this Anthropologie inspired chandelier. They are super easy and cost very little to make. You could make several and hang them all over the house for a winter, festive air.
This is from Casasugar.com, which is a site where you will find many other wonderful and easy decorating ideas.
-------------------------------------------------------------------------------------------------------------
Here's What You Need
read more.
This is from Casasugar.com, which is a site where you will find many other wonderful and easy decorating ideas.
-------------------------------------------------------------------------------------------------------------
Here's What You Need
- Magazines, newspapers, or craft paper
- Ribbon, yarn, or thread
- An embroidery hoop
- A pushpin
- Scotch tape
read more.
- Rip out pages from your magazine or newspaper. Fold and cut six to ten snowflakes. (If you can't remember how to fold and cut snowflakes, check out this tutorial.)
- Cut three pieces of yarn/ribbon to the same length.
- Tie the three pieces of ribbon onto the embroidery hoop, equidistant from each other.
- Gather the three ends. Tie a very loose knot midway up the three pieces of yarn. With one hand, hold the embroidery hoop down on a flat surface. With the other, gently pull at the knot. This will help to keep the three pieces of yarn the same length. Pull the knot tight.
- Hang embroidery hoop from doorway with the pushpin. Makes sure that the hoop is hanging straight. If not, readjust lengths of yarn/ribbon.
- Tie six to ten varying lengths of yarn/ribbon around exterior of embroidery hoop. You can also tie one piece from the middle knot.
- Scotch tape corner of each snowflake to end of each piece of yarn/ribbon.
- Rehang your snowflake chandelier around a light fixture, in your favorite corner, or above your dining room table.
- Happy holiday decorating!
Labels:
Anthropologie,
Chandelier,
Embroidery hoop,
Ribbon,
Scotch Tape,
Snowflake,
Yarn
Sunday, September 18, 2011
{Tutorial } How to make a glittered felt christmas tree
Here is another tutorial for making a lovely Christmas Tree. This tutorial is quite simple and should be easy enough for small children to participate in making these trees. Why not make a bunch of them in various Christmas colors and arrange them on the dinner table as your center piece this year. Give every child one to have for their own after dinner is over.
This tutorial is from Lorajean's Magazine and I hope you will visit her site and browse her other tutorials.
-------------------------------------------------------------------------------------------------------------
This tutorial is from Lorajean's Magazine and I hope you will visit her site and browse her other tutorials.
-------------------------------------------------------------------------------------------------------------
I am so excited to share with you the EASY instructions on how to make this felt glittered tree. I really am super happy with the way they turned out.
Here is what you need:
- Felt (I used white)
- Scissors
- Glue gun and glue sticks
- Craft glue
- Clear glitter
- Styrofoam cone (or any cone shaped thing)
Note: I didn't use a Styrofoam cone I used a cone shaped wire tree from Dollar Tree last year, but I think they aren't there any more. You can find foam cones at Dollar Tree or any craft store.
cut 4 large strips (2 in wide)
cut 4 medium strips (1 1/2 in wide)
______________________________________
Step Two
Cut deep scallops into each strip
Step three
Glue along scalloped edge of each strip and glitter generously.
______________________________________
Step four
Hot glue each strip onto the cone starting with the large strips at the bottom and ending with the smallest at the top.
______________________________________
Step four
Hot glue each strip onto the cone starting with the large strips at the bottom and ending with the smallest at the top.
____________________________________________
Labels:
Christmas,
Christmas craft,
Christmas tree,
holiday
Thursday, September 8, 2011
Videos to show you how to make a wreath from newspaper
Here are two videos from YouTube that show you how to make a really beautiful Christmas wreath out of plain ordinary newspaper. This is something even your children will enjoy making. The cost is nothing more than some newspapers--and those can be found at recycling stations if you don't have your own paper, or ask your friends to save them for your.
So here they are. Enjoy making these. Send me a picture if you make yourself one. I think I may have to try this myself this year!
And:
Related articles
So here they are. Enjoy making these. Send me a picture if you make yourself one. I think I may have to try this myself this year!
And:
Related articles
- DIY: One Wreath, Two Ways (casasugar.com)
- Deck the Haus: Recycled Magazine Wreath (casasugar.com)
- Crafty Christmas Week: DIY Recycled Wreath (allhome-improve.com)
- Customizable Fabric Scrap Wreath (blogher.com)
Thursday, September 1, 2011
Another Carol Duval Show video! Making Polymer Clay Tree Ornaments
Image by CraftyGoat via FlickrHere is a wonderful video from the Carol Duval Show (how I miss that show) that has Donna Kato making a beautiful Christmas tree hanging ornament. I bet if you watch this video, you will soon run to get some polymer clay and begin making your own ornaments. I know I will make these, but first I will watch the video about 100 times because I just love Carol and Donna Kato, but I really loved this show.
Enjoy the video!
Enjoy the video!
Related articles
- Do You Make Ornaments For Your Tree? (casasugar.com)
- Polymer clay anyone? (lulushappygogreen.wordpress.com)
Labels:
Christmas,
Christmas tree,
Craft,
decorations,
holiday,
Ornament,
Polymer clay
Sunday, August 21, 2011
Shabby Christmas Tree Tutorial -- Easy and inexpensive!
Search Amazon.com for christmas decorationsHere's a wonderful and quick way to decorate your home for Christmas. You could probably whip up a few of these in no time and set them up on a hallway table to make a festive entrance to your home. I found this tutorial on Creations by Kara and wanted to share it here with you. Please visit the original site and let them know how your trees turn out. There are many other wonderful tutorials just waiting for you there.
If you do make these, please send pictures so I can see you handywork. I would love to hear any comments you may have, too.
5-Take each strip of fabric and glue it together at the top. It only takes a tiny bit of glue. I used hot glue because it is the fastest. Now you will have a little loop of fabric:
6-Attach the first loop to the bottom of the tree form. You want a little bit of fabric to hang below the styrofoam.
7-Keep adding on loops of fabric, overlapping them slightly. It doesn’t matter if the tops are even, you just want to make sure the bottoms of the loops are even with each other.
8-Keep adding loops till you get all the way around the tree. See how the tops are totally uneven? Doesn’t matter.
9-Now you are ready to start the next layer. Attach the first fabric loop so that it lays in between two of the loops on the bottom layer. You want them to be staggered (like bricks), and not just glued on in straight vertical rows. Now keep adding loops just like you did for the first layer.
12-All you have left to do is fluff up the loops to even out your tree. Then add embellishments. I tore tiny strips of red and green fabric and tied them into bows. I used a piece of gold ribbon for the bow at the top. You could use buttons, ribbon, berries, bells, stars, whatever you like!!
Here is the version of the tree with green fabric:
Thanks to Kara for such a wonderful tutorial on making these Christmas trees.
Search Amazon.com for christmas decorations
If you do make these, please send pictures so I can see you handywork. I would love to hear any comments you may have, too.
1-Start with one of these styrofoam trees. They’re everywhere right now; you can even find them at the Dollar Store.
2-Decide what fabric you would like to use. I used canvas, but you can use anything you like. Burlap is all the rage right now, and I’m sure it would work perfectly. Tear strips of your fabric about 1″ wide.
3-To cut your strips, stack a set of three or four strips on top of each other. That way you can cut four at a time instead of having to cut each strip one at a time.
4-Cut the strips about 4 inches long.
5-Take each strip of fabric and glue it together at the top. It only takes a tiny bit of glue. I used hot glue because it is the fastest. Now you will have a little loop of fabric:
6-Attach the first loop to the bottom of the tree form. You want a little bit of fabric to hang below the styrofoam.
7-Keep adding on loops of fabric, overlapping them slightly. It doesn’t matter if the tops are even, you just want to make sure the bottoms of the loops are even with each other.
8-Keep adding loops till you get all the way around the tree. See how the tops are totally uneven? Doesn’t matter.
9-Now you are ready to start the next layer. Attach the first fabric loop so that it lays in between two of the loops on the bottom layer. You want them to be staggered (like bricks), and not just glued on in straight vertical rows. Now keep adding loops just like you did for the first layer.
10-Repeat this process till you get to the top of your tree. (If you run out of loops like I did, just tear more fabric and make more.) Make sure the top layer of fabric pokes up above the styrofoam. You don’t want any of that ugly stuff to show. Just take that extra fabric, fold it down, and glue it to the top of the styrofoam. You can trim off some of the fabric if it is too bulky.
12-All you have left to do is fluff up the loops to even out your tree. Then add embellishments. I tore tiny strips of red and green fabric and tied them into bows. I used a piece of gold ribbon for the bow at the top. You could use buttons, ribbon, berries, bells, stars, whatever you like!!
Here is the version of the tree with green fabric:
Thanks to Kara for such a wonderful tutorial on making these Christmas trees.
Search Amazon.com for christmas decorations
Labels:
Christmas,
Christmas decoration,
Christmas tree,
holiday
Monday, August 1, 2011
Make Hanging Christmas Stars -- Tutorial from The Magic Onions
Here is a wonderful tutorial I found on The Magic Onions that I think you will love. These are so beautiful and easy to make. I hope this year to make many of them to hang in the house as Christmas decorations.
Please visit the original blog to see not only this tutorial, but also many other wonderful ideas. Let me know if you make these and send me pictures. My fingers are just itching to get started......
These are just so creative! I can imagine having these stars everywhere, can't you?
---------------------------------------------------------------------------------------------------------------
Please visit the original blog to see not only this tutorial, but also many other wonderful ideas. Let me know if you make these and send me pictures. My fingers are just itching to get started......
These are just so creative! I can imagine having these stars everywhere, can't you?
---------------------------------------------------------------------------------------------------------------
What you'll need;
Square paper or card (any size will do... if your paper is not square, cut it into a square before you start.)
Scissors
Glue (I find glue dots work the best as there's no drying time)
Ribbon
When you open your paper, this is what your folds look like...
Use your scissors to cut along the 4 folds on the straight sides of your paper. Cut a little less than half way up the fold...
Lie your paper flat, upside down. Fold cut paper back, along the diagonals folds (as in photo) making points at the corners of the paper.
Now for the gluing... put a dab of glue (or a glue dot) onto one side of each point of the star...
Pull the other side of the point over the side with the glue and stick... this makes your 3D star point.
Pull the other side of the point over the side with the glue and stick... this makes your 3D star point.
Repeat all folding, cutting and sticking steps with your second piece of square paper... you will now have the two sides of your square.
Position them, one on top of the other, with the middle points facing outwards and stick them together using a few dabs of glue or glue dots and...
Your star is ready for hanging!
They really do look lovely anywhere... so bright and colorful!We have some in our window, some hanging from our beams and even more decorating our cabinets.
And they really are easy to make, I promise! Once you make one and get the hang of the folding and cutting, you will be able to churn these pretty stars out in a matter of minutes. They make very sweet holiday gifts for friends and neighbors too... go on, have a go, make some stars!
Blessings and magic!
Related articles
- Fantastic Ideas for Homemade Christmas Cards (kleenexmums.com.au)
- Recycle Paper Bags into Christmas Stockings (education.com)
Labels:
Christmas crafts,
Christmas ornaments,
Christmas Stars,
Craft,
Paper,
Tutorial
Subscribe to:
Posts (Atom)