Here's a wonderful and quick way to decorate your home for Christmas. You could probably whip up a few of these in no time and set them up on a hallway table to make a festive entrance to your home. I found this tutorial on Creations by Kara and wanted to share it here with you. Please visit the original site and let them know how your trees turn out. There are many other wonderful tutorials just waiting for you there.If you do make these, please send pictures so I can see you handywork. I would love to hear any comments you may have, too.
1-Start with one of these styrofoam trees. They’re everywhere right now; you can even find them at the Dollar Store.
2-Decide what fabric you would like to use. I used canvas, but you can use anything you like. Burlap is all the rage right now, and I’m sure it would work perfectly. 
Tear strips of your fabric about 1″ wide.
Tear strips of your fabric about 1″ wide.
3-To cut your strips, stack a set of three or four strips on top of each other. That way you can cut four at a time instead of having to cut each strip one at a time.
4-Cut the strips about 4 inches long.
5-Take each strip of fabric and glue it together at the top. It only takes a tiny bit of glue. I used hot glue because it is the fastest. Now you will have a little loop of fabric:
6-Attach the first loop to the bottom of the tree form. You want a little bit of fabric to hang below the styrofoam.
7-Keep adding on loops of fabric, overlapping them slightly. It doesn’t matter if the tops are even, you just want to make sure the bottoms of the loops are even with each other.
8-Keep adding loops till you get all the way around the tree. See how the tops are totally uneven? Doesn’t matter.
9-Now you are ready to start the next layer. Attach the first fabric loop so that it lays in between two of the loops on the bottom layer. You want them to be staggered (like bricks), and not just glued on in straight vertical rows. Now keep adding loops just like you did for the first layer.
10-Repeat this process till you get to the top of your tree. (If you run out of loops like I did, just tear more fabric and make more.) Make sure the top layer of fabric pokes up above the styrofoam. You don’t want any of that ugly stuff to show. Just take that extra fabric, fold it down, and glue it to the top of the styrofoam. You can trim off some of the fabric if it is too bulky.
11- Now your tree should look something like this:
12-All you have left to do is fluff up the loops to even out your tree. Then add embellishments. I tore tiny strips of red and green fabric and tied them into bows. I used a piece of gold ribbon for the bow at the top. You could use buttons, ribbon, berries, bells, stars, whatever you like!!
Here is the version of the tree with green fabric:
Thanks to Kara for such a wonderful tutorial on making these Christmas trees.
Search Amazon.com for christmas decorations
