Friday, July 1, 2011

Santa Christmas Ornament with Photo Frame Tutorial from The Magic Bean

 Here's a great tutorial for making a wonderful Christmas ornament.  If you sew at all, you will want to try this little gentleman.  Can't you picture this ornament hanging on your tree this year?  Whose picture will you want to showcase with this jolly elf?

This is from The Magic Bean, which is a wonderful site full of tutorials of all sorts.  Please check it out and tell them I sent you.

Now, I'm off to sew!!

-----------------------------------------------------------------------------------------------------
The people down at my local hardware store think I'm weird.  They think I'm weird because normal people look at curtain rings and think of, well, curtain rings, but I look at curtain rings and I see this:
Cloth Doll Santa Photo Christmas Ornament
How I get from curtain rings to a cloth doll santa with a photo frame Christmas ornament is murky, but somehow my mind makes the quantum jump.
Transforming a curtain ring to a very personalised Christmas ornament will not be a quantum jump for you however; you just have to follow the step by step instructions.
What you need:
Note:  My supply lists tend to be pretty long and scary looking, but I tend to put every little thing on them.  Chances are you will have many of these things around the house.
  • Small scrap skin coloured high quality quilting cotton (look for a high thread count, so that the seams don't come apart when the head is stuffed).  I love using a Hoffman watercolour batik fabric in Latte.  You can buy it here in the UK from Cassie Rafferty's website
  • Small scrap white cotton fabric for the beard and moustache
  • Small scrap red cotton fabric for body and hat
  • Small scrap green fabric for hat lining
  • 1” (2.5cm) wide strip green fabric (ripped) for wrapping curtain ring
  • Curtain ring - mine is 2¼" (5.7cm) at the outside diameter, you can use plastic, but you may want to use wood as it is easier to glue the fabric to it.
  • Tacky glue
  • Small scrap green felt for hearts on gloves and for backing the photo frame
  • 2 x size 11 or 12 seed beads in black for the eyes
  • Small scrap red felt for the gloves
  • Standard sewing equipment: sewing machine, pins, sewing shears, hand sewing needles (a John James Long Darner #7 needle is especially helpful) etc.
  • Mechanical pencil
  • High quality polyester thread (such as Gutermann) to match fabrics
  • High quality stuffing (I prefer Fairfields)
  • 1 x ⅛" (3mm) pom-pom for top of hat
  • 6" (15.2cm) ⅛" (3mm) wide ribbon for loop to hang ornament
  • Powdered blush make-up (matt variety, not shiny or metallic)
  • 2 x miniature picks of holly (each holly leaf in the picks I used are ¾" or 19mm long x ½" or 13mm wide)
  • Small piece of cardboard, the weight should be like that found on the back of notebooks
  • Photograph with an image that will fit inside the ring
  • Paper scissors
  • Strong thread such as Gutermann upholstery thread
  • Optional but helpful:  haemostats (American spelling is hemostats) for stuffing
  • Hot glue or other strong glue such as UHU Power
You also need to download the pattern page here: Download Santa Christmas Ornament with Photo Frame Pattern Page
General Directions:
Read the instructions through before beginning.
Pattern pieces should be copied onto card stock and cut out exactly on the line.  Trace the pattern using a mechanical pencil especially for the head pieces.   If you prefer, you may use a purple fade-away marker.  When the fabric is particularly dark, a gel pen can be used to trace lines, but the lines will not be removable, so be sure the lines cannot be seen if you choose this option!
Note that a solid line on the pattern pieces indicates that you trace and sew directly on this line.  Then you cut out around the pattern leaving a 1/8” seam allowance.  A solid line with a dotted line indicates that a seam allowance has been included meaning that you cut out the pattern piece directly on the outer solid line. All seam allowances are ⅛” unless otherwise stated.Open toe foot for sewing machine
Change your sewing machine needle before sewing.
I also use an open toe foot on my sewing machine (pictured right).
Your stitch length should be set to 1.5 which is 15 stitches per inch.  Remember to back-stitch at the beginning and end of every seam so that your seams don’t come apart.
How to Make it:
1. Using a mechanical pencil, trace the head-back & head-front pattern pieces onto the wrong side of the doubled skin coloured fabric, folded with right sides together.  Make sure that the arrows on the patterns are aligned with the straight grain of the fabric, so that both head pieces are cut on the bias.
Santa ornament 001
2.  Sew the curve of the head-back, leaving the tab open.  Sew down the front of the face from the forehead to the chin.  Cut out both pieces, leaving a ⅛” (3mm) seam allowance along the seams and cutting right on the remaining traced line.
Santa ornament 004
4.  Turn the head-front right side out.   Slide it into the head-back with right sides together.  Match the seams at the top and bottom of the head and pin.  Baste stitch around the head by hand before machine sewing all the way around the head.  Don't be tempted to skip the hand basting.  With a head this small, the basting will save you time and frustration.  I now hand baste all my heads together before machine sewing and I never have to re-sew a doll head.
Santa ornament 006
5.  Turn right side out and fill head firmly with stuffing.  Beginner doll makers will be astounded by the amount of stuffing I use to stuff a head.  I used the entire piece of stuffing pictured below in this one tiny head.
Santa ornament 008
When I stuff , I grab one bit of a large piece of stuffing with my haemostats and push the stuffing through the opening, feeding the stuffing into the head in one continuous piece until the head feels like a ripe kiwi in terms of its firmness.  I do not use individual, small pieces of stuffing as that makes the head lumpy.
Santa ornament 010
6.  When the head is firm enough, use the tip of a John James Long Darner #7 needle to gently scoop stuffing into the nose and chin areas.  Just stick the tip of the needle into the fabric near the tip of the nose and dig gently into the stuffing to pull it into the nose area.
 Santa ornament 011
 7.  Trace the torso pattern onto the wrong side of a piece of doubled red cotton fabric, folded with right sides together.  Sew the torso from one side of the opening at the neck, around the shape, stopping at the other side of the neck opening.  Cut out the torso, clipping the corners.
Santa ornament 013
8.  Turn the torso right side out.  Stuff the torso firmly through the neck.  The neck itself must be firmly stuffed.  With a hand sewing needle and strong thread, sew a gathering stitch around the neck opening.  Pull the gathering stitch tightly to close the neck opening and anchor off the thread.
Santa ornament 016
9.  Squeeze the neck with your haemostats and stuff into the head opening.  Pin in place.
Santa ornament 018
10.  Ladder stitch the head in place with strong thread.
Fig. 6 ladder stitch diagram
If you don’t know how to do the ladder stitch, have a look at the diagram above. 
I’ve used red thread so you can see the stitch better.  The blue lines indicate where the thread is travelling through the folded edge of the fabric.  When you pull the thread taut, the two bits of fabric butt together.  You should pull the thread taut as you go, but I have left it loose at the end here so you can see the stitch better.
11.  Trace the beard and moustache patterns onto the wrong side of a piece of doubled white cotton fabric, folded with right sides together.  Sew the beard and then the moustache leaving the marked opening open on both pieces.  Cut out the beard and moustache.  There is no need to clip  into the curves. Turn both pieces right side out through the openings.  Stuff each piece so that the shape is filled, but do NOT stuff them as firmly as you did the head.  With a hand sewing needle and regular thread, ladder stitch the openings closed in both pieces.
Santa ornament 021
12.  Make a division between the two halves of the moustache with a hand sewing needle and regular thread.  First, anchor the thread in the middle of the moustache piece at the seam and then wrap the thread around the moustache on the outside of the fabric. Pull the thread tightly so that the thread gathers the moustache and appears to divide it in half  When you get back to the point where you first anchored your thread, take one small stitch approx. ⅛” (3mm) long and loop the thread around the moustache again, pulling the thread to define the division of the moustache.  Repeat the thread loop one more time and anchor off the thread.
Santa ornament 022
13.  To finish the face, first prepare some fabric from which to cut the eyelids.  Apply a scant amount of tacky glue to the wrong side of a very small scrap of fabric.  Fold the fabric in half with the tacky glue sandwiched between the layers with wrong sides together.  Place something heavy on top of the glued layers of fabric and leave to dry.
14.  While the glue is drying on the eyelid fabric, mark two dots with your mechanical pencil on the head where you will be placing the eyes.  The eyes should sit at or just above the halfway point of the head, that is halfway between the crown of the head and the chin.  Imagine a horizontal line running across the face at this halfway point.  Along the halfway line mark two points, one ½" (1.3cm) to either side of the seam dividing the face in half.
Santa ornament 028
 With hand sewing needle (a beading needle or other needle that fits through the bead) sew a size 11 or 12 seed bead to each marked dot.
15.  Once the glue on the eyelid fabric is dry, use a mechanical pencil to lightly trace the eyelid template pattern twice onto the fabric with the straight edge of the template resting on the fold.  Cut out.
Santa ornament 026
16.  Run a thin line of tacky glue along the curved top edge of the eyelid making sure to place the glue right to the corners of the eyelid and leaving the lash-line (the fold) glue-free.  Place the eyelid so that it partially covers the top of the bead.  Press the top curved edge of the eyelid down and hold it in place until the glue dries.  Warning:  do not pin the eyelids in place or you will get little holes in the fabric of the eyelid that won’t disappear due to the glue used to bond the fabric.  Repeat for the second eyelid.
Santa ornament 030
17.  With a small paintbrush, make-up brush or cotton-bud (Q-tip in North America), apply a small amount of powdered blush make-up to the cheeks.
18. Pin the beard to the face leaving a small gap below the nose (to leave room for the moustache) and ladder stitch the beard to the face, along the top curve where it touches the face.
Santa ornament step by step 012
19.  By hand, tack the moustache to the face, just below the nose.
Santa ornament step by step 015
20. To make the hat, place a piece of red cotton fabric on top of the fabric for the hat lining with right sides together and trace the hat pattern onto the wrong side of the fabric.  Sew along the front of the hat (the solid line on the pattern).  Cut out the hat leaving a ⅛” (3mm) seam allowance along the seams and cutting right on the remaining traced line.  Turn right sides out.
Santa ornament step by step 003
21.  Fold the hat in half (so that the ear flaps are together) with right sides together.  Fold a piece of  ⅛" (3mm) wide ribbon in half to form a loop. Position the ribbon loop so it sits at the pointed top of the hat near the fold with the loop on the right side of the fabric, facing down and with the ends of the ribbon sticking out above the seam allowance.  Sew along the back seam of the hat using a ⅛” (3mm) seam allowance.  Make sure that the ribbon loop has been sewn into the seam.
Santa ornament step by step 009
Turn right side out. Place a small amount of stuffing into the pointed end of the hat and pull the hat onto the doll’s head and pin in place.  Fold the flap at the front of the face up.  By hand, tack the hat firmly to the head.  By hand, tack a ⅛” (3mm) pom-pom to the top of the hat.
Santa ornament step by step 016
22.  Trace the mitten pattern twice onto a doubled piece of felt.  Sew around the shape of each mitten leaving the wrist open.  Cut out leaving a very scant ⅛” (3mm) seam allowance along the seams and cutting right on the remaining traced line.  Clip as close to the stitching between the thumb and the finger part of the mitten as you can.  Turn the mittens right side out.
Santa ornament 031
23.  Stuff the mittens with a small amount of stuffing.  Do NOT stuff them too much, they must be flexible enough to wrap around the curtain ring.  By hand, whip-stitch the mittens closed.
24. Rip a strip of cotton 1” (2.5cm) wide, making sure that there are raw, ripped edges on both sides of the fabric strips. Begin to wrap the curtain ring with the strip by gluing one end to the ring and then continuing to wrap the curtain ring overlapping the fabrics strips so the curtain ring doesn't show beneath.  When the ring is completely covered, apply a small amount of tacky glue to the end of the fabric strip and hold it in place until it is dry.
Place the curtain ring on a piece of cardboard and trace around the circle to create a backing for the photograph.  Cut out.  Trace the cardboard circle onto a piece of felt and cut out the felt circle.  Glue the felt circle to one side of the cardboard circle.  Once the glue is dry, use the felt covered cardboard circle to trace around the image in your chosen photo and cut the photo out.  Glue the photo to the cardboard side of the circle or use double-sided tape to adhere it.  Set the photo aside for now.
Santa ornament 033
25.  Wrap the mittens around the top of the curtain ring so that the bottoms of the mittens can't be seen from the front.  By hand, firmly tack the mittens to the fabric covering the curtain ring, making sure to tack at points all around the mittens.
Santa ornament step by step 019
26.  Wrap a miniature pick of holly around the curtain ring at the bottom, gluing the holly pick in place (hot glue might be best for this task).
27.  Glue the felt-backed photo circle to the back of the curtain ring along the edges of the photo preferably with hot glue or another strong glue.
Then apply some glue to the top of the felt backing on the circle.  Press the glue to the chest of the Santa.  By hand, tack the mittens to the Santa's chest with strong thread for added security.
Santa ornament step by step 023
28. Add the finishing touches by tracing the heart template twice onto a piece of contrasting coloured felt and cut out.  Glue a heart to the front of each mitten with tacky glue.  Then bore a hole into the hat just above the hat flap with a sharp pair of small scissors or with an awl, if you have one.  Apply a small amount of tacky glue to the stem of a miniature holly pick and slip it into the hole in the hat.  By hand, tack the hat flap in place.
Cloth Doll Santa Photo Christmas Ornament
Jolly well done with this jolly old fellow.
If you want to see the rest of my free tutorials, click the link.  And to make sure that you don't miss out on any further free tutorials subscribe to my blog, the Magic Bean here.
If you love Christmas and you love cloth dolls (ooh, pick me!) then you might be interested in two of my patterns which bring together all things festive in the form of a cloth doll.  Check out the Christmasy Give us a Kiss Pattern and the wintry Snowflake Sprite.
Enhanced by Zemanta

Wednesday, June 29, 2011

Heads up!!

Just wanted to remind you that there is officially less than 6 months left before Christmas.  Now if you get paid monthly, that is less than 6 opportunities to buy Christmas gifts early.  If you get paid every other week, there are less than 12 opportunities.  For those lucky enought to get paid weekly, you have less than 24 weeks. 

Christmas is coming--no doubt.  You might as well be prepared as not!

Hope you get ready so you can enjoy the original concept for this hoilday.  Christmas is not about hype and shopping.  It is about reflection and thankfulness.  It is about family time.  It is about joy and hope.

You don't have to be Christian to be able to celebrate this holiday.  Every religion is about these things.
Enhanced by Zemanta

Tuesday, June 7, 2011

The Official Crepe Paper Christmas Tree Tutorial........

Here is a wonderful tutorial on making crepe paper Christmas trees that I thought you would enjoy.  I found this originally on AllFreeHolidayCrafts, but that link forwards you to Creative Chaos.  So be sure to visit both sites and try out some of their other craft ideas.

If you make one of these trees, I know that I would love to see it and I know that Creative Chaos would also love to get a look.

__________________________________________________________________________________


2010 December Craft 033
Woo Hoo....After a back breaking day at Paper Tales (which consisted of eating pumpkin bread, talking with some lovely ladies who read my blog, solving a glitter crisis, eating more pumpkin bread, ringing up crafty customers, inadvertently letting someone know that the special crinkle ribbon that's all the rage at the Tim Holtz 12 days of Tags blog is simply seambinding, eating more pumpkin bread and then finally waving goodbye to everyone), I arrived home to two boys and a Papa who had been waiting anxiously for my arrival so we could all watch Toy Story 3 together.   Once my eyes were dry from the ending of the movie, I got right to work on my Snowflake Box kits for tomorrow's class in between five loads of laundry.  Why am I telling you this?  Because I want everyone to see that I am totally committed to keeping my promise to bring you the tutorial.......even though I really want to sit on the couch and watch a movie......
2010 December Craft 028
But I must show you how to do this so you can become just as obsessed as I am.  Then I won't feel so lonely in my little world of crepe paper and glitter.   First, though, I have to tell you how it all happened.  Cindy Gilstrap, a wonderful crafter/artist, had made a crepe paper Christmas tree for the Joli Paquet blog that you can see here.   I instantly fell in love with it.  However, because I have the patience of a gnat, I decided to use my sewn ruffled crepe instead.   And the rest is history......
2010 December Craft 036

Now, I did a google search to see if these had ever been done before and didn't find anything.  Has anyone ever seen anything like this before?   Let me know if you do!
2010 December Craft 005
Now, here are a couple things you need to know about this project.   Number one....once you start making these trees, you will find yourself unable to stop. Seriously. Ruffled crepe paper will never be the same to you.  You will find yourself looking for reasons why you need just one more crepe paper tree in your life.
2010 December Craft 010
Number two....expect to be pulling hot glue strings from your tree, your table, your body and your children for at least the next two months.
Ok....I think we're ready!
First gather your supplies.....
1. Crepe paper......I have no idea how much because I neglected to measure beforehand so let's just say a roll
2. Hot glue gun (this is what I used) or a heavy gel glue like fabri-tac or 3 in 1
3. Piece of paper to make into a cone or paper mache cone
4. Peppermint Bark candy bar (you will get hungry)
2010 December Craft 003
I took a 8 1/2 x 11 piece of paper and rolled it into a cone.  I then glued the end at the top to secure.......
2010 December Craft 004
2010 December Craft 005
Glue the sides......
2010 December Craft 006
Cut the bottom of the cone to from the base.  Once you cut it set it on the table to see if it's even and stands straight......
2010 December Craft 007
2010 December Craft 008
2010 December Craft 009
I sew my crepe paper on my sewing machine using a basting stitch and tight tension.  It ruffles up just right.  On my old machine, I had to pull the one end of the thread to ruffle it.  That works also.
2010 December Craft 025
Start at the bottom with your first section skirting the bottom of the table.   Glue into place......
2010 December Craft 014
Continue around the base until you meet up in the back.....

2010 December Craft 015
Take it a bit above the last bottom skirt and continue around the cone.....
2010 December Craft 016
I worked in sections using pieces that were about two feet long.   When you get to the end, just match end to end and glue....
2010 December Craft 019
2010 December Craft 020
2010 December Craft 021
 Time for a break.....grab your chocolate......
2010 December Craft 022
 Ok, back to work!    We're almost done.......

2010 December Craft 026
Ta Da!  You did it!  For the very top I use a small section of the ruffled crepe paper and cut it a bit shorter than the other layers and then glue into place........

2010 December Craft 027
I hope you enjoyed it!   Put a bunch of glitter on and you are good to go.  I would LOVE to see any of the ones you make.  Please send pictures!!  Ok....I'm off to bed.....I've got a class to teach tomorrow!
2010 November 038
Enhanced by Zemanta

Monday, May 30, 2011

Memorial Day 2011

This holiday is for remembering and reflecting.  Please don't let me stop you from doing just that.

I'd also like to remind you that we are already 6 months into this year and Christmas is fast approaching. 

Maybe this year you might try to send gifts to some of the soldiers we have in the Middle East.  I know that there are many fine young men and women that would love to receive a present from a secret Santa.  Maybe you could spearhead such an event at your church or community center this year.  Let's make a habit of remembering our soldiers while they live not just when they die.  These young people really do give up everything for us and live with fear and constant danger.  They deserve to be thanked. 


Enhanced by Zemanta

Sunday, May 29, 2011

Give a hoot for the holidays--an owl ornament tutorial

This is just too cute to pass on.  I found this originally on TipJunkie.com, but the original post is on 
juicy-bits.typepad.com.  The blogger, Jessica Levitt, has a wonderful blog with many wonderful craft items.  This one, with the owl ornaments, fits well here on my Christmas blog.

If you make any of these from Jessica's instructions, please send me a picture so I can post it here.  Send one to Jessica, too!  I love working with felt to make tree ornaments.  It is so easy and forgiving.  It comes in a wealth of colors and thicknesses.  You can sew, embroider, glue everything together.  All in all, a great craft supply.

Here is the owl ornament tutorial:
__________________________________________________________________________________


Owl orns 1
But I did do a little felt hand sewing.  I made the little gnome from the last post and a few other things for my tree.  I’m doing a woodland theme this year.  Hopefully it will be all set up soon for you to see.
Owl orns 2
Anyway, these are the little owl ornaments I made.  And it’s a simple tutorial, just for you!
Owl orns 3
Download Owl ornament and all you do is cut it out from felt and sew however you’d like.
I love ‘em.
 Owl orns 4
And if you make it bigger it would make a cute softie.  I was sewing one on the bus with my daughter’s field trip and a couple of the little girls were begging me for one of their own.  So they could make a cute gift or stocking stuffer.  (Of course, I’d stay away from buttons with real little ones for safety’s sake.)
Enjoy!
JT
*****NOTE: I forgot to mention on the pattern about ric rac.  That's what I used to make the "feathers" on the belly....
Enhanced by Zemanta